SHIMANO Cranks CLARIS FC-R2000 175mm 50/34z. without cover 8k. two-piece without bearing

Center CLARIS R2000 with integrated axle (2-piece), for 8 speed transmissions, made of aluminum alloy with aluminum converters. The integrated axle guarantees maximum power transmission from the rider to the bike.
The design of the four-arm crank taken from higher road sets.
Recommended bearings BBRS500, thread or Press Fit



Type: ROAD, Total package weight: 1910g, Crank length: 175 mm, 8 speed, Number of teeth: 50/34 teeth, 2-piece, BB shell 68/70mm for thread, anthracite, without cover, Material of converters: aluminum (upper), aluminum (lower), Pitch of converters: 110mm/110mm

SHIMANO CLARIS components are primarily intended for beginner cyclists who are looking for excellent quality with an aggressive sports design, but plan short, sporty or longer familiarization rides. The sporty design of CLARIS components promises the possibility of surviving an intense driving experience even during the daily routine.

Safety notice
WARNING
Information on the installation, adjustment and replacement of products that cannot be found in the user manual will be provided at the place of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING:
Do do not disassemble or modify the product. This may cause the product to malfunction, cause you to fall unexpectedly and seriously injure yourself.
Before riding the bicycle, check that the crank arms are not cracked. If there are cracks, the crank arm may break and you may fall off the bike.
Be careful not to catch parts of your clothing in the chain while riding. Otherwise, you may fall off the bike.

CAUTION:
Be careful not to touch the teeth of the gears. There is a risk of injury.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html