SHIMANO Brake lever. Tiagra BL-4700 pair for straight road handlebars gray

in the openings of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after dismounting the bicycle. During braking, the calipers and disc brake rotor become hot, so if you touch them, you can burn yourself.
- Do not allow oil or grease to get on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to malfunction and lead to serious injury due to a fall or crash.
- Check the thickness of the brake pads and do not use them if they are 0.5mm or less. This may cause the brakes to malfunction and lead to serious injury.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor can break and lead to serious injury from a fall. Replace the disc brake rotor with a new one.

WARNING
З Warm-up time
- Disc brakes have a certain warm-up time, and the braking power gradually increases along with the increasing warm-up time. Be sure to avoid any such increases in braking force while using the brakes during the warm-up period. The same situation occurs when replacing brake pads or disc brake rotor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html