Description
The computer is compatible with SHIMANO Steps components. It is attached to the handlebars with a 35mm diameter clamp and a 31.8mm adapter. 1.39 inch, black and white display. Wireless communication via Bluetooth LE and ANT Private. Customization of settings using the E-Tube Project application for smartphones and tablets. Pedaling support mode: BOOST, TRAIL, ECO, OFF, WALK. Compatible with EW-SD50 cables.
Safety Notice
WARNING
Information on installation, adjustment and replacement of products that is not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING:
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly, and you may be seriously injured.
Ensuring safety
- Follow the instructions below to prevent burns or other injuries caused by fluid leakage, overheating, fire, or explosion.
To ensure safe riding
- Be careful not to pay excessive attention to the cycle computer display while riding. Otherwise, you may have an accident.
- Before riding the bicycle, check that the wheels are securely mounted on the bicycle. If the wheels are not securely mounted, the bicycle may fall over and cause serious injury.
- When riding an electric-assisted bicycle, make sure that you are fully familiar with the starting characteristics of the bicycle before riding on roads with multiple vehicle lanes and pedestrian walkways. If the bicycle starts suddenly, it may lead to an accident.
- Before riding the bicycle, make sure that the front and rear lights can be turned on.
Safe use of the product
- Before wiring or installing parts on the bicycle, remove the battery and charging cable. Failure to do so may result in electric shock.
- Do not move the bicycle while charging the battery installed on the bicycle. The power plug of the battery charger may be loose and may not be fully inserted into the electrical outlet, which poses a risk of fire.
- Avoid touching the drive unit that has been in continuous use for a long time. The surface of the drive unit will become hot and contact with it may cause burns.
- Clean the chain regularly using a suitable chain cleaner. The frequency of maintenance will vary depending on riding conditions.
- Never use alkaline or acidic cleaners to remove rust. Using such cleaners may damage the chain and result in serious injury.
- When assembling this product, be sure to follow the instructions in the owner's manual. In addition, it is recommended that you use only genuine SHIMANO parts. If bolts and nuts are left loose or the product is damaged, the bicycle may suddenly fall over, resulting in serious injury.
Handling the battery
- If battery fluid leaks into your eyes, immediately rinse the affected area thoroughly with drinking water (tap water) without rubbing your eyes, and seek medical attention immediately. Failure to do so may cause damage to your eyes from the battery fluid.
- Do not charge the battery in places with high humidity or outdoors. Otherwise, it may cause an electric shock.
- Do not insert or pull out the plug when it is wet. Failure to do so may cause an electric shock. If water leaks from the plug, dry it thoroughly before inserting it.
- If the battery is not fully charged even after 2 hours of the specified charging time, immediately disconnect the battery from the outlet and contact the place of purchase. Otherwise, it may overheat, burst, or catch fire. Refer to the user manual for the battery charger for the appropriate charging time.
- Do not use the battery if there are obvious scratches or other external damage. Otherwise, it may rupture, overheat, or cause operational problems.
- The operating temperature ranges for the battery are listed below. Do not use the battery at temperatures outside these ranges.
If the battery is used or stored at temperatures outside these ranges, fire, injury, or problems during operation may occur.
1. During discharge: -10°C - 50°C
2. During charging: 0°C - 40°C
WARNING:
To ensure safe riding
- For safe riding, follow the instructions in the bicycle manual.
Safe use of the product
- Never attempt to modify the system yourself. This may cause problems with the system's operation.
- Check the battery charger and adapter regularly; pay particular attention to damage to the cable, plug, and casing. If the charger or adapter is damaged, do not use it until it has been repaired.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not allow children to play near the product.
Handling the battery
- Do not leave the battery in a place exposed to direct sunlight, inside a car on a hot day, or in other hot places. This may cause the battery to leak.
- If the leaking liquid comes into contact with your skin or clothing, immediately wash it off with clean water. Leaking liquid may damage your skin.
- Store the battery in a safe place out of reach of children and animals.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html
Safety Notice
WARNING
Information on installation, adjustment and replacement of products that is not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING:
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly, and you may be seriously injured.
Ensuring safety
- Follow the instructions below to prevent burns or other injuries caused by fluid leakage, overheating, fire, or explosion.
To ensure safe riding
- Be careful not to pay excessive attention to the cycle computer display while riding. Otherwise, you may have an accident.
- Before riding the bicycle, check that the wheels are securely mounted on the bicycle. If the wheels are not securely mounted, the bicycle may fall over and cause serious injury.
- When riding an electric-assisted bicycle, make sure that you are fully familiar with the starting characteristics of the bicycle before riding on roads with multiple vehicle lanes and pedestrian walkways. If the bicycle starts suddenly, it may lead to an accident.
- Before riding the bicycle, make sure that the front and rear lights can be turned on.
Safe use of the product
- Before wiring or installing parts on the bicycle, remove the battery and charging cable. Failure to do so may result in electric shock.
- Do not move the bicycle while charging the battery installed on the bicycle. The power plug of the battery charger may be loose and may not be fully inserted into the electrical outlet, which poses a risk of fire.
- Avoid touching the drive unit that has been in continuous use for a long time. The surface of the drive unit will become hot and contact with it may cause burns.
- Clean the chain regularly using a suitable chain cleaner. The frequency of maintenance will vary depending on riding conditions.
- Never use alkaline or acidic cleaners to remove rust. Using such cleaners may damage the chain and result in serious injury.
- When assembling this product, be sure to follow the instructions in the owner's manual. In addition, it is recommended that you use only genuine SHIMANO parts. If bolts and nuts are left loose or the product is damaged, the bicycle may suddenly fall over, resulting in serious injury.
Handling the battery
- If battery fluid leaks into your eyes, immediately rinse the affected area thoroughly with drinking water (tap water) without rubbing your eyes, and seek medical attention immediately. Failure to do so may cause damage to your eyes from the battery fluid.
- Do not charge the battery in places with high humidity or outdoors. Otherwise, it may cause an electric shock.
- Do not insert or pull out the plug when it is wet. Failure to do so may cause an electric shock. If water leaks from the plug, dry it thoroughly before inserting it.
- If the battery is not fully charged even after 2 hours of the specified charging time, immediately disconnect the battery from the outlet and contact the place of purchase. Otherwise, it may overheat, burst, or catch fire. Refer to the user manual for the battery charger for the appropriate charging time.
- Do not use the battery if there are obvious scratches or other external damage. Otherwise, it may rupture, overheat, or cause operational problems.
- The operating temperature ranges for the battery are listed below. Do not use the battery at temperatures outside these ranges.
If the battery is used or stored at temperatures outside these ranges, fire, injury, or problems during operation may occur.
1. During discharge: -10°C - 50°C
2. During charging: 0°C - 40°C
WARNING:
To ensure safe riding
- For safe riding, follow the instructions in the bicycle manual.
Safe use of the product
- Never attempt to modify the system yourself. This may cause problems with the system's operation.
- Check the battery charger and adapter regularly; pay particular attention to damage to the cable, plug, and casing. If the charger or adapter is damaged, do not use it until it has been repaired.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Do not allow children to play near the product.
Handling the battery
- Do not leave the battery in a place exposed to direct sunlight, inside a car on a hot day, or in other hot places. This may cause the battery to leak.
- If the leaking liquid comes into contact with your skin or clothing, immediately wash it off with clean water. Leaking liquid may damage your skin.
- Store the battery in a safe place out of reach of children and animals.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html
More from category
Additional information
| Category: | Shimano Steps computers |
| Connectivity: | BT |
| For cable system : | Steps |
Need Help?
SHIMANO Steps Computer SC-E7000 with 35mm clamp holder
84,90 €
70,75 € excl. VAT
