SHIMANO Battery charger SM-BCR2 for SM-BTR2/BT-DN110 with cable

The SM-BCR2 charger is compatible with SMBTR2, BTDN1101, BTDN110A1 flashlights. It is designed to charge SHIMANO DI2 internal batteries, it also serves as a connecting device for PC for E-TUBE PROJECT firmware updates and settings.

Type: UNI, Total package weight: 185g, black, Di2

Safety notice
WARNING
Information about installation, setting and replacement of products not found in the user manual will provide you at the point of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

DANGER
- Do do not let the charger get wet or use it while it is wet; also do not touch or hold it with wet hands. Failure to do so may result in operational problems or electric shock.
- Do not cover the charger with cloth or other similar materials during use. Failure to do so may result in heat accumulation, case deformation, fire, or overheating.
- Do not disassemble or modify the charger. Failure to do so may result in electric shock or injury.
- Use an AC adapter with a USB port with a voltage of 5.0V DC and a current of at least 1.0A DC. If you use an adapter with a current rating of less than 1.0A DC, the AC adapter may heat up and cause fire, smoke, overheating, damage, electric shock, or burns.

WARNING
- Do not use any other USB cable, but only use the USB cable supplied with the device to connect to the PC. It may cause charging failure, fire, or failure of the connected PC due to heating.
- Always hold the plug of the cable when connecting or disconnecting the USB or charging cable. Failure to do so may result in fire or electric shock. If the following symptoms occur, stop using the device and contact your dealer. Fire or electric shock may occur.
- If there is a pungent smell of smoke coming from the power plug or the plug heats up, there may be a bad connection inside the power plug.
- If there is thunder during charging with the power adapter and USB port, do not touch the device, the bicycle, or the power adapter. If struck by lightning, electric shock may occur.
- Use an AC adapter with a USB port with a voltage of 5.0 V DC and a current of at least 1.0 A DC. If an AC adapter with a current of less than 1.0A DC is used, charging failure may occur, or the AC adapter may overheat resulting in a fire.
- Do not use a USB hub to connect the cable to the USB port of the PC. Charging failure or fire may occur due to overheating.
- Be careful not to damage the charging cable. (Do not damage, modify, forcefully bend, twist or stretch them, do not place them near hot objects, place heavy objects on them, or tie them tightly together.) If used in a damaged state, fire, electric shock, or short circuit may occur. place.

CAUTION
- Unplug the USB cable or charging cable while performing maintenance.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html