SHIMANO Front hub HB-QC400 32d. R.U. black Center Lock

Heavy-duty front hub with industrial bearings for long-lasting performance. Easy installation of the disc brake rotor on the Center Lock. Hub width: OLD - 100mm. Bearings: 10x26x8mm.

Type: MTB, Total package weight: 347g, 32 holes, Front, Black, Axle 10mm, Mounting method: Quick release, Center Lock, Material: Aluminum

Safety notice
WARNING
Information about installation, adjustment and replacement of products not found in user manual, will be provided to you at the point of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- This wheel is equipped with a hub with a quick release that facilitates installation and removal. Failure to properly install this quick release (wheel) hub on the bicycle may cause the wheel to detach from the bicycle while riding resulting in serious personal injury.
- Use a front fork equipped with a wheel retention mechanism.
- CAREFULLY READ THE INSTRUCTIONS FOR THE QUICK RELEASE HUB IN THE OWNER'S MANUAL BEFORE USE. If you have any questions, ask your dealer. INCORRECT INSTALLATION OF THE HUB CAN RESULT IN SERIOUS PERSONAL INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever can cause the wheel to fall off, etc. and may result in serious injury from a fall.
- If the quick release mechanism is not used correctly, the wheel may fall off the bicycle and serious injury may result. Please read the operating instructions for the quick release mechanism carefully before use.
- If the quick release lever is on the same side as the disc brake rotor, there is a danger that it may interfere with the disc brake rotor. Check that even after tightening the quick-release lever with your palm with full force, the quick-release lever does not interfere with the disc brake rotor. If the lever interferes with the disc brake rotor, stop using the wheel and consult your dealer or representative.

WARNING
Tighten and loosen the quick release lever only with your hands. Never use any tools to tighten the quick release lever, e.g. hammer as damage may occur.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html