SHIMANO Front hub SLX HB-M7110 100x15mm axle 32d. black Center Lock

The SLX M7110 front hub is suitable for disc brakes. Easy rotor installation on Center Lock. 15mm solid E-Thru thru-axle. Hub width: O.L.D. 100 mm. The hub comes without the Center Lock SM-HB20 nut.

Type: MTB, Total package weight: 231g, 32 holes, Front, black, 15mm, Mounting method: Fixed axle, Center Lock, Material: Aluminum

The SLX is ready to go anytime, anywhere, whether it's a day trip, a local cross country race or a ride with friends after work. It certainly won't disappoint you.

Safety notice
CAUTION
Information on installation, setup and replacement of products not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the axle release lever can cause the wheel to fall off, etc. and may result in serious injury from a fall or crash.
- Before riding a bicycle, you should carefully check the hubs and make sure that there are no cracks in the axles; if you find any unusual conditions, DO NOT use the bike. This front hub is designed for downhill and freeride cycling. However, depending on driving conditions, cracks can develop on the hub axle, which can result in axle failure. This can lead to an accident that could result in serious injury or even death.
- This hub can only be used in combination with a special front fork and E-THRU. If used in combination with any other front fork or hub axle, the wheel may detach from the bicycle while riding, resulting in serious injury.
- When mounting the front wheel to a front suspension fork, always follow the instructions in the front suspension fork manual. The securing method as well as the tightening torque of the front wheel varies according to the type of front suspension fork used. Failure to follow the instructions may cause the front wheel to fall off and result in serious injury.
- Check that the axle release lever does not interfere with the disc brake rotor even when it is fully engaged. If the axle release lever is on the side of the disc brake rotor, it can interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html