SHIMANO Hub with dynamo DH-C3000 6V/3W 32d. black on r.u.+surge protection SMDH10

Dynamo hub DHC3000. Dynamo hub designed for use on trekking and city bikes. The charge generates voltage 6V, power 3W, 32 holes for tips. It is designed to drive both rear and front lights with classic light bulbs in the lights. Improved sealing for longer life, stable performance.

Type: CTB, Total package weight: 743g, 32 holes, Front, black, Al alloy inner structure, 6V/3W, Mounting method: Quick release mounting, For V-brakes, Material: Aluminum

Safety notice
CAUTION
Information about installation, setup and replacement of products not found in the user manual will be provided at the point of purchase or at the distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "user manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must be followed at all times to avoid personal injury and physical damage to the equipment and the environment. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- This wheel is equipped with a hub with a quick release that facilitates installation and removal. Failure to properly install this quick release hub (wheel) on the bicycle may cause the wheel to detach from the bicycle while riding, resulting in serious bodily injury.
- Use a front fork equipped with a wheel retention mechanism.
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. The wheel may fall off, etc., resulting in a fall and serious injury.
- Observe the total weight of the bicycle (bike + rider + luggage) indicated on the main part of the hub. If the total weight of the bike is indicated on the main part of the hub, there is a built-in force modulator that regulates the excessive braking effect. If the total weight of the bicycle exceeds the recommended values, braking may be insufficient; if it is lower, the braking may be too effective and the wheel may lock, as a result of which you may fall off the bike. Make sure you fully understand the power modulator's performance before using it. The force modulator is not an anti-lock device.
- Before riding the bike, make sure that the front and rear lights can be turned on.

WARNING
Never touch the hub dynamo connection terminals when riding or turning the wheels. Failure to do so may result in electric shock.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone Number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html