SHIMANO Rear Hub XT FH-M8210 148x12mm Axle 32d. 12-speed Black Center Lock

The DEORE XT FH-M8210-B rear hub offers increased reliability and performance thanks to an improved seal design and industrial bearings, ensuring easy maintenance and smooth operation. With a lighter weight and faster engagement (maximum 3.5 degrees), the FH-M8210-B is available in a 12x148 mm boost design and in traditional 28 or 32 hole versions.

Type: MTB, Total package weight: 374g, 32 holes, Rear, black, 12mm, Mounting method: Thru axle, 12 speed, Center Lock, Material: Aluminum

View product manual.

Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you on site purchase or from a distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User's Manual" thoroughly before use, follow it for proper use, and keep it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Incorrect use of the axle release lever may cause the wheel to come off, etc. and may result in serious injury due to a fall or collision.
- Read the E-THRU lever user manual carefully. Improper use of the E-THRU lever may cause an accident such as a wheel falling off, which may result in serious injury.
- Before riding the bicycle, you should carefully check the hubs to make sure that there are no cracks on the axles; if you find any abnormal conditions, DO NOT use the bicycle. These rear hubs are not designed for downhill or freeride riding. Depending on the riding conditions, cracks may form on the hub axle, which may cause the axle to malfunction, which may result in an accident resulting in serious injury or death.
- Check that the axle release lever does not interfere with the disc brake rotor even when it is fully engaged. If the axle release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html