Description
Robust and versatile aluminum dropper post suitable for use from Gravel/Cross Country to All Mountain/Enduro.
The highest quality aluminum achieves the ideal balance between strength and weight.
Lightweight and easy to maintain.
Easy saddle adjustment with 2-bolt head clamping design.
Internal cable routing.
The seatpost is supplied without a lever, you can order one of the PRO levers: PRAC0212 - universal, PRAC0211 - One by, PRAC0213 - for road handlebars.
Diameter: 30.9 mm
Stroke: 150 mm
Length: 415 mm
Offset: 0 mm
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts. parts.
Do not extend the seat post beyond the minimum insertion mark marked on the back of the seat post.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than that indicated on the packaging (for example: trekking, road, touring, track, MTB, Downhill, Freeride, BMX).
If you are in doubt whether the use of this PRO series product is suitable for your intended use, please contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com
IMPORTANT!
Regularly check that the screws are tightened to the appropriate torque.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
The highest quality aluminum achieves the ideal balance between strength and weight.
Lightweight and easy to maintain.
Easy saddle adjustment with 2-bolt head clamping design.
Internal cable routing.
The seatpost is supplied without a lever, you can order one of the PRO levers: PRAC0212 - universal, PRAC0211 - One by, PRAC0213 - for road handlebars.
Diameter: 30.9 mm
Stroke: 150 mm
Length: 415 mm
Offset: 0 mm
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts. parts.
Do not extend the seat post beyond the minimum insertion mark marked on the back of the seat post.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than that indicated on the packaging (for example: trekking, road, touring, track, MTB, Downhill, Freeride, BMX).
If you are in doubt whether the use of this PRO series product is suitable for your intended use, please contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com
IMPORTANT!
Regularly check that the screws are tightened to the appropriate torque.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Additional information
| Category: | PRO, Suntour |
| Seatpost diameter: | 30,9 mm |
| Seatpost length: | 472 mm |
| Seatpost material: | Hliník |
| Seatpost type: | Teleskopické |
| Seatpost travel: | 150 mm |
| Seatpost compatibility : | MTB |
Need Help?
PRO Saddle seat KORYAK telescopic with inner. guide 150mm stroke
184,04 €
149,63 € excl. VAT
