Description
Popular aluminum handlebars from the PRO KORYAK line.
Handlebars designed for enduro and trail riding.
Designed for greater comfort, control and durability.
Made of AL2014 aluminum alloy.
The handlebars are 760 mm wide, they can be shortened using the marks at the end of the handlebars to 700 mm.
They are part of a wide range of KORYAK components allowing for perfect bike customization.
Diameter: 31.8mm
Width: 760 mm
Rise: 5 mm
Backsweep: 8°
Upsweep: 4°
Weight: 280g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift lever, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Handlebars designed for enduro and trail riding.
Designed for greater comfort, control and durability.
Made of AL2014 aluminum alloy.
The handlebars are 760 mm wide, they can be shortened using the marks at the end of the handlebars to 700 mm.
They are part of a wide range of KORYAK components allowing for perfect bike customization.
Diameter: 31.8mm
Width: 760 mm
Rise: 5 mm
Backsweep: 8°
Upsweep: 4°
Weight: 280g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift lever, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Additional information
| Category: | Handlebars |
| Handlebar diameter: | 31,8 mm (1-1/4") |
| Handlebar suitability: | MTB |
| Handlebar width: | 760 mm |
| Handlebar material: | Aluminum |
