Description
The new PRO Vibe Aero carbon handlebar, combined with the PRO Vibe Aero stem, combines aerodynamics with optimization to provide an adjustable cockpit that meets all the needs of a road cyclist. Combining aerodynamic handlebars and stem, this PRO cockpit provides cyclists with the benefits of an integrated cockpit.
Made from T700 and T800 UD carbon.
Aerodynamic top with anti-slip surface finish.
Fully compatible with the SHIMANO Di2 system.
SHIMANO Satellite shifter integration option.
Center diameter: 1 1/4" (31.8 mm)
Drop: 130 mm
Reach: 80 mm
Flare: 10 degrees
Forward sweep: 10 degrees
Handlebar width: 370 mm
Weight: from 240g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift lever, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Made from T700 and T800 UD carbon.
Aerodynamic top with anti-slip surface finish.
Fully compatible with the SHIMANO Di2 system.
SHIMANO Satellite shifter integration option.
Center diameter: 1 1/4" (31.8 mm)
Drop: 130 mm
Reach: 80 mm
Flare: 10 degrees
Forward sweep: 10 degrees
Handlebar width: 370 mm
Weight: from 240g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift lever, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Additional information
| Category: | Handlebars |
| Handlebar diameter: | 31,8 mm (1-1/4") |
| Handlebar suitability: | Cestné |
| Handlebar width: | 370 mm |
| Handlebar material: | Carbon fiber |
Need Help?
PRO Handlebar VIBE AERO CARBON 10 degree flare, 31.8
368,08 €
299,25 € excl. VAT
