Description
The computer is compatible with SHIMANO Steps DU-EP801/DU-EP600 motors. It is attached to the handlebars with a 22.2mm diameter clamp. It also functions as an assist switch, allowing the rider to adjust the assist level using large buttons. Light on/off button. The display has a simple and compact menu display with monochrome font. Compatible with EW-SD300 cables.
Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Riding safety precautions
- Be careful not to pay excessive attention to the cycle computer display while riding. Otherwise, you may have an accident.
- Before riding the bicycle, make sure that the front and rear lights can be turned on.
Safety precautions
- Before wiring or installing parts on the bicycle, remove the battery and charging cable. Failure to do so may result in electric shock.
- Follow the instructions in the manuals when installing the product. We recommend that you use genuine SHIMANO parts. If the screws and nuts become loose or damaged, the bicycle may suddenly fall over, resulting in serious injury.
WARNING:
Riding Safety Precautions
- For safe riding, follow the instructions in the bicycle manual.
Safety Precautions
- Never modify the system. Otherwise, a system failure may occur.
- Use the product under the supervision of a person responsible for safety and only according to the instructions. Do not allow anyone (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, to use the product.
- Do not allow children to play near the product.
Manufacturer's information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING:
Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
Riding safety precautions
- Be careful not to pay excessive attention to the cycle computer display while riding. Otherwise, you may have an accident.
- Before riding the bicycle, make sure that the front and rear lights can be turned on.
Safety precautions
- Before wiring or installing parts on the bicycle, remove the battery and charging cable. Failure to do so may result in electric shock.
- Follow the instructions in the manuals when installing the product. We recommend that you use genuine SHIMANO parts. If the screws and nuts become loose or damaged, the bicycle may suddenly fall over, resulting in serious injury.
WARNING:
Riding Safety Precautions
- For safe riding, follow the instructions in the bicycle manual.
Safety Precautions
- Never modify the system. Otherwise, a system failure may occur.
- Use the product under the supervision of a person responsible for safety and only according to the instructions. Do not allow anyone (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, to use the product.
- Do not allow children to play near the product.
Manufacturer's information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
Additional information
| Category: | Electrical wiring, displays, parts |
| For cable system : | Steps |
Need Help?
SHIMANO Steps Computer SC-EN500 with holder, clamp 22.2
79,63 €
66,36 € excl. VAT
