Description
The most popular PRO line of road stems comes in a new ±6 degree slope.
The stems are designed to help you fine-tune your perfect cockpit.
Available in a wide range of lengths from 50 to 130 mm.
Rugged aluminum alloy construction.
Compatible with PRO STANDARD computer mount (PRAC0247) and internal cable routing headset (PRHS0124).
Length: 50 mm
Slope: +/-6°
Stem: 1-1/8" (28.6 mm)
Handlebar: 31.8 mm
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, extensions, etc.).
Check regularly that the screws are tightened to the specified torque.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
The stems are designed to help you fine-tune your perfect cockpit.
Available in a wide range of lengths from 50 to 130 mm.
Rugged aluminum alloy construction.
Compatible with PRO STANDARD computer mount (PRAC0247) and internal cable routing headset (PRHS0124).
Length: 50 mm
Slope: +/-6°
Stem: 1-1/8" (28.6 mm)
Handlebar: 31.8 mm
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, extensions, etc.).
Check regularly that the screws are tightened to the specified torque.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Additional information
| Category: | Adjustable |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 110 mm |
| Stem suitability : | Cestné |
| Handlebar diameter: | 31,8 mm (1-1/4") |
Need Help?
PRO Stem PLT Al, +/-6°, 31.8
41,45 €
34,54 € excl. VAT
