HQBC KIQS red

The KIQS children's helmet with an integrated visor is made of hardened EPS designed specifically for bicycle helmets. The lining inside increases comfort when wearing, is removable and washable. The helmet is ventilated by 6 ventilation holes. The front holes are covered with a mesh to prevent insects from entering under the helmet. Fine adjustment of the size within a given range is possible with the rotary adjustment mechanism at the back.
Weight: 219g

Show product instructions.

Safety warning
WARNING! The helmet is intended for cyclists and users of skateboards and roller skates. It is not designed for use in any other type of sport or other mode of transport such as mopeds or electric scooters. This helmet must not be used by children when climbing or similar activities where there is a risk of strangulation/hanging if the child gets caught in the helmet. Never use the helmet to ride motor vehicles.
A helmet can only protect if it fits well and the buyer has the opportunity to try on different sizes and choose a helmet of a size that fits reliably and comfortably on the head. The helmet should be adjusted to the user so that it fits well, for example, the straps must be positioned so that they do not cover the ears, the buckle must lie outside the jaw and the straps and buckle must be adjusted comfortably and firmly. The helmet must not move forwards or backwards, therefore it is equipped with an adjustment mechanism and straps that must be correctly adjusted and fastened before riding. To ensure the required protection, the helmet must be worn so that it protects the forehead and is not pushed too far back into the back of the head. The helmet must not obstruct the view. The helmet must be fastened so that it remains on the head in the event of a fall or impact. A helmet cannot always protect against injury. Therefore, pay special attention to its adjustment, fit and safety when riding. The helmet contains padding (cushions) that can be placed inside the helmet where you need them, given the shape of your head, and thus achieve the ideal helmet fit. Replace and discard the helmet if it has been subjected to a severe impact. Never change or remove any original helmet components recommended by the manufacturer, as this may reduce the functionality of the helmet and cause serious injuries in the event of an impact. Never modify the helmet for other purposes or equip it with accessories other than those recommended by the manufacturer. Always replace damaged parts with new original parts.

Manufacturer information
Manufacturer:
PAUL LANGE OSLANY, s.r.o.
Mierová 854/37, 972 47 Oslany, SLOVAK REPUBLIC
IČO: 36306975, IČDPH: SK2020079875
Tel: +421 463 938 110, E-mail: info@paul-lange.sk, Web: paullange.sk