Description
AL-7075 aluminum road stem with lightweight titanium bolts that reduce aerodynamic drag due to their placement.
The stem is fully compatible with the SHIMANO Di2 system and, in combination with the VIBE handlebars, allows for complete integration and internal routing of brake and shift cables.
The triangular profile of the stem body improves the weight-to-stiffness ratio.
Length: 80 mm
Slope: -10°
Stem neck: 1-1/8" (28.6 mm)
Handlebars: 1-1/4" (31.8 mm)
Weight: From 120g
Safety warning
Failure to follow the instructions may result in serious injury. injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions for all additional components carefully (brake levers, shift levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Tools required:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
The stem is fully compatible with the SHIMANO Di2 system and, in combination with the VIBE handlebars, allows for complete integration and internal routing of brake and shift cables.
The triangular profile of the stem body improves the weight-to-stiffness ratio.
Length: 80 mm
Slope: -10°
Stem neck: 1-1/8" (28.6 mm)
Handlebars: 1-1/4" (31.8 mm)
Weight: From 120g
Safety warning
Failure to follow the instructions may result in serious injury. injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions for all additional components carefully (brake levers, shift levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Tools required:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 110 mm |
| Stem suitability : | Cestné |
| Handlebar diameter: | 31,8 mm (1-1/4") |
Need Help?
PRO VIBE ALLOY Stem -10° 31.8
86,46 €
72,05 € excl. VAT
