Description
The PRO Vibe Superlight stem is PRO's lightest high-performance stem, designed for use with the PRO Vibe Superlight handlebar.
The stem is designed to give you a better cycling experience and allow you to optimize and improve the comfort of your bike.
It is made of 7075 aluminum alloy with titanium bolts and weighs only 92 grams (for the 70 millimeter version).
Available in lengths from 70 to 120 millimeters, the PRO Vibe Superlight stem provides more than just low weight and high performance, it also helps ensure a perfect fit on the bike.
The PRO Vibe Superlight stem is optimized for SHIMANO Di2 integration and is compatible with fully internal cable routing on bikes, as well as semi-integrated or external cable routing.
The PRO VIBE computer mount (PRAC0248) simply attaches to the stem and holds your bike computer (mount not included).
Length: 70 mm
Slope: ± 6°
Stem: 1-1/8"
Handlebar: 1-1/4" (31.8 mm)
Weight: from 92g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, extensions, etc.).
Check regularly that the screws are tightened to the specified torque.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
The stem is designed to give you a better cycling experience and allow you to optimize and improve the comfort of your bike.
It is made of 7075 aluminum alloy with titanium bolts and weighs only 92 grams (for the 70 millimeter version).
Available in lengths from 70 to 120 millimeters, the PRO Vibe Superlight stem provides more than just low weight and high performance, it also helps ensure a perfect fit on the bike.
The PRO Vibe Superlight stem is optimized for SHIMANO Di2 integration and is compatible with fully internal cable routing on bikes, as well as semi-integrated or external cable routing.
The PRO VIBE computer mount (PRAC0248) simply attaches to the stem and holds your bike computer (mount not included).
Length: 70 mm
Slope: ± 6°
Stem: 1-1/8"
Handlebar: 1-1/4" (31.8 mm)
Weight: from 92g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than the one indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, extensions, etc.).
Check regularly that the screws are tightened to the specified torque.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer information
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 110 mm |
| Stem suitability : | Cestné |
| Handlebar diameter: | 31,8 mm (1-1/4") |
Need Help?
PRO Stem VIBE SUPERLIGHT +/-6° 31.8
127,56 €
106,30 € excl. VAT
