Description
AL-6061 aluminum stem with “headlock” clamping.
Suitable for use on AM and XC, specially optimized for E-MTB.
3D forged construction.
Tone-on-tone design.
Length: 45 mm
Slope: 0°
Stem: 1-1/8" (28.6 mm)
Handlebar: 35 mm
Weight: from 160g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on 1" fork neck use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you have any doubts about the suitability of this PRO series product for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten in a crisscross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Suitable for use on AM and XC, specially optimized for E-MTB.
3D forged construction.
Tone-on-tone design.
Length: 45 mm
Slope: 0°
Stem: 1-1/8" (28.6 mm)
Handlebar: 35 mm
Weight: from 160g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
In case of mounting on 1" fork neck use the appropriate insert.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you have any doubts about the suitability of this PRO series product for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten in a crisscross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 45 mm |
| Stem suitability : | MTB |
| Handlebar diameter: | 35 mm (1-3/8") |
Need Help?
PRO Stem KORYAK E-PEFORMANCE 0° 35
51,02 €
42,52 € excl. VAT
