Description
AL-7075 aluminum stem with “headlock” clamping.
Suitable for use on AM, Trail and XC.
3D forged and CNC optimized construction.
Compatible with the SHIMANO Di2 system and thus allows complete integration in combination with Koryak Di2 handlebars or e-MTB.
Length: 100 mm
Slope: +/- 6°
Stem: 1-1/8" (28.6 mm)
Handlebars: 1-1/4" (31.8 mm)
Weight: from 137g
Safety warning
Failure to follow instructions may result in serious injury.
After an accident / In the event of a crash, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the mounting surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you have any doubts about the suitability of this PRO series product for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Suitable for use on AM, Trail and XC.
3D forged and CNC optimized construction.
Compatible with the SHIMANO Di2 system and thus allows complete integration in combination with Koryak Di2 handlebars or e-MTB.
Length: 100 mm
Slope: +/- 6°
Stem: 1-1/8" (28.6 mm)
Handlebars: 1-1/4" (31.8 mm)
Weight: from 137g
Safety warning
Failure to follow instructions may result in serious injury.
After an accident / In the event of a crash, replace the product and all related parts.
In case of mounting on a 1" fork neck, use the appropriate insert.
Never apply grease to the mounting surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you have any doubts about the suitability of this PRO series product for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please carefully read the manufacturer's instructions for all additional components (brake levers, shift levers, extensions, etc.).
Regularly check that the screws are tightened to the specified value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten alternately in a cross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value specified on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 100 mm |
| Stem suitability : | MTB |
| Handlebar diameter: | 31,8 mm (1-1/4") |
Need Help?
PRO Stem KORYAK +/- 6° 31.8
43,57 €
36,31 € excl. VAT
