Description
AL-7075 aluminum road stem with lightweight titanium bolts that reduce aerodynamic drag thanks to their location. The stem is fully compatible with the SHIMANO Di2 system, whether with DURA-ACE or Ultegra groupsets, and in combination with VIBE handlebars, allows for full integration and internal routing of brake and shift cables.
Length: 90 mm
Slope: -10°
Height: 36.5 mm
Stem: 1-1/8" (28.6 mm)
Handlebar: 1-1/4" (31.8 mm)
Weight: From 125g (without top cap)
Safety warning
Failure to follow instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
When mounting on a 1" fork stem, use the appropriate insert.
Never apply lubricant to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than that indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified torque. value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten in a crisscross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value indicated on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Length: 90 mm
Slope: -10°
Height: 36.5 mm
Stem: 1-1/8" (28.6 mm)
Handlebar: 1-1/4" (31.8 mm)
Weight: From 125g (without top cap)
Safety warning
Failure to follow instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
When mounting on a 1" fork stem, use the appropriate insert.
Never apply lubricant to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than that indicated on the packaging (for example: trekking, road, cyclocross, track, MTB, Downhill, Freeride, BMX).
Do not use attachments with a higher tightening torque than the recommended value of 5 Nm.
If you are in doubt whether the use of this PRO series product is suitable for your intended use, contact your local PRO dealer or distributor or visit our website www.pro-bikegear.com.
IMPORTANT!
Please read the manufacturer's instructions carefully for all additional components (brake levers, shift levers, attachments, etc.).
Regularly check that the screws are tightened to the specified torque. value.
Required tools:
Allen key, torque wrench and sandpaper
IMPORTANT!
If the stem has 4 screws: always tighten in a crisscross pattern.
If there are additional instructions between the body and the front of the stem - follow them carefully.
Stem angle (only for adjustable stems):
Adjust the angle.
Tighten to the torque value indicated on the stem.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Solid |
| For headset : | 28,6 mm (1-1/8") |
| Stem length: | 90 mm |
| Stem suitability : | Cestné |
| Handlebar diameter: | 31,8 mm (1-1/4") |
Need Help?
PRO Stem VIBE ALLOY -10° 2023 31.8
56,55 €
47,13 € excl. VAT
