Description
Lightweight aluminum telescopic seatpost with lower travel suitable for Gravel/Cross-Country riding.
Saddle clamp with two titanium screws.
Optimized internal cable routing.
Oval design.
SHIMANO cable with special Optislick surface treatment, which ensures quick and smooth seatpost adjustment.
One of the levers must be ordered for the seatpost: PRAC0212 - universal, PRAC0211 - One by, PRAC0213 - for road handlebars.
Diameter: 27.2 mm
Stroke: 100mm
Length: 400mm
Offset: 0 mm
Weight: 427g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
Do not extend the seat post beyond the minimum insertion mark, which is marked on the back of the seat post.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category marked on the packaging (for example: trekking, road, touring, track, MTB, Downhill, Freeride, BMX).
If you are in doubt as to whether the use of this PRO series product is suitable for your intended use, use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com
IMPORTANT!
Regularly check that the screws are tightened to the specified torque.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Saddle clamp with two titanium screws.
Optimized internal cable routing.
Oval design.
SHIMANO cable with special Optislick surface treatment, which ensures quick and smooth seatpost adjustment.
One of the levers must be ordered for the seatpost: PRAC0212 - universal, PRAC0211 - One by, PRAC0213 - for road handlebars.
Diameter: 27.2 mm
Stroke: 100mm
Length: 400mm
Offset: 0 mm
Weight: 427g
Safety warning
Failure to follow the instructions may result in serious injury.
After an accident/impact, replace the product and all related parts.
Do not extend the seat post beyond the minimum insertion mark, which is marked on the back of the seat post.
Never apply grease to the clamping surfaces.
Never use a higher tightening torque than that indicated on the product.
Do not use this product in any category other than the category marked on the packaging (for example: trekking, road, touring, track, MTB, Downhill, Freeride, BMX).
If you are in doubt as to whether the use of this PRO series product is suitable for your intended use, use, contact your local PRO dealer or distributor, or visit our website www.pro-bikegear.com
IMPORTANT!
Regularly check that the screws are tightened to the specified torque.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Telescopic |
| Seatpost diameter: | 27,2 mm |
| Seatpost length: | 400 mm |
| Seatpost material: | Hliník |
| Seatpost type: | Teleskopické |
| Seatpost travel: | 100 mm |
| Seatpost compatibility : | MTB |
Need Help?
PRO THARSIS telescopic seatpost with internal guide 100mm travel, without lever
237,01 €
197,51 € excl. VAT
