Description
Straight handlebars made of aluminum alloy AL6061.
Designed for cross-country.
31.8mm diameter.
Width 720mm. Possibility to shorten them using the marks at the end of the handlebars.
Weight: 265g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, use only the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque specified in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (for example, on road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Designed for cross-country.
31.8mm diameter.
Width 720mm. Possibility to shorten them using the marks at the end of the handlebars.
Weight: 265g
Safety warning
Failure to follow the instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, use only the washers supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque specified in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (for example, on road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Handlebars |
| Handlebar diameter: | 31,8 mm (1-1/4") |
| Handlebar suitability: | MTB |
| Handlebar width: | 720 mm |
| Handlebar material: | Aluminum |
Need Help?
PRO Handlebars LT MTB FLAT 31.8/720mm
28,06 €
23,39 € excl. VAT
