Description
Superlight carbon handlebars for cross-country riding.
Oversized 35mm diameter.
Can be shortened to 640mm using the marks on the end of the handlebars.
Diameter: 35mm
Width: 720mm
Rearward slope: 9°
Weight: 130g
Safety warning
Failure to follow instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, use only the washers that are supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque specified in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Please read the manufacturer's instructions carefully for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to the specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Oversized 35mm diameter.
Can be shortened to 640mm using the marks on the end of the handlebars.
Diameter: 35mm
Width: 720mm
Rearward slope: 9°
Weight: 130g
Safety warning
Failure to follow instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, use only the washers that are supplied with the product.
Never use grease on the screws or clamping surfaces.
Always use the recommended tightening torque specified in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Please read the manufacturer's instructions carefully for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to the specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Telephone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Handlebars |
| Handlebar diameter: | 35 mm (1-3/8") |
| Handlebar suitability: | MTB |
| Handlebar width: | 720 mm |
| Handlebar material: | Carbon fiber |
Need Help?
PRO Handlebars THARSIS FLAT CARBON 9 degrees. backsweep, 35/720mm
138,99 €
115,82 € excl. VAT
