Description
Road aerodynamically shaped handlebars with extra grip in the upper part.
Made of Al-6066 aluminum alloy, which makes them have excellent strength and flexibility.
They are fully compatible with the SHIMANO Di2 Dura-Ace or Ultegra system and together with the VIBE stem allow full integration and internal routing of shift and brake cables.
Center diameter: 1 1/4" (31.8 mm)
Drop: 130 mm
Reach: 103 mm
Flare: 10 degrees
Top sweep: 12 degrees
Handlebar width: 380 mm
Weight: 340g
Safety warning
Failure to follow instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the shims that are supplied with the product.
Never use grease on screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
Made of Al-6066 aluminum alloy, which makes them have excellent strength and flexibility.
They are fully compatible with the SHIMANO Di2 Dura-Ace or Ultegra system and together with the VIBE stem allow full integration and internal routing of shift and brake cables.
Center diameter: 1 1/4" (31.8 mm)
Drop: 130 mm
Reach: 103 mm
Flare: 10 degrees
Top sweep: 12 degrees
Handlebar width: 380 mm
Weight: 340g
Safety warning
Failure to follow instructions may result in serious injury.
Replace the product after an accident/impact.
To reduce the diameter of the fork neck, only use the shims that are supplied with the product.
Never use grease on screws or clamping surfaces.
Always use the recommended tightening torque stated in the assembly instructions or on the product.
Do not use this product in a category other than that for which it is intended (e.g. road bikes or MTB).
Do not use MTB handlebars in combination with handlebar extensions.
Do not use extensions that exceed the recommended tightening torque of 6 Nm.
Important:
Carefully read the manufacturer's instructions for any additional components (such as brake levers, shift levers, etc.) before using them on the product.
Regularly check that the screws are still tightened to specification.
For information on correct assembly, please refer to the installation instructions supplied with the product.
Manufacturer details
Shimano Europe BV, High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Phone number: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
More from category
Additional information
| Category: | Handlebars |
| Handlebar diameter: | 31,8 mm (1-1/4") |
| Handlebar suitability: | Cestné |
| Handlebar width: | 380 mm |
| Handlebar material: | Aluminum |
Need Help?
PRO Handlebars VIBE AERO ALLOY PURSUIT 10 degrees. flare, 12 degrees. sweep, 31.8
92,13 €
76,77 € excl. VAT
