Description
PDR8000 road pedals SHIMANO ULTEGRA set, SPD SL construction. 4mm longer axle. The choice of many professionals and performance riders. With an extra wide pedal body base for better pedaling force transmission. Carbon composite pedal body for low weight and high stiffness. Extended bearings and steel axle for higher stiffness and force transmission. Pedal contact surface with stopper reinforced with steel plates to reduce wear. Adjustment of pedal engagement and disengagement force. Including SM-SH11 cleats, with 6° cleat clearance when cleats are on.
Type: ROAD, Total package weight: 248g, Use: ROAD/TT/TRI, single-sided, SPD-SL, black, with SM-SH11 cleats, +4mm axle, Material: pedal body (carbon+steel), axle (chrome+steel+nickel)
Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly, and you may be seriously injured.
- Before attempting to ride with these pedals and cleats (on shoes), make sure you understand the operation of the locking/releasing mechanism of the pedals and cleats (on shoes). SPD-SL pedals are designed to release only when necessary. They are not designed to release automatically if you fall off the bicycle.
- Use only SPD-SL shoes with this product. Other types of shoes may not release from the pedals or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. Failure to tighten the screws securely may result in a fall that will prevent the cleats from releasing.
- Before attempting to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do it automatically and with minimal effort.
- Ride on a flat surface first until you have learned how to engage and release the cleats from the pedals.
- Before riding, adjust the holding force of the cleats on the pedals to your needs. If the holding force of the cleats on the pedals is weak, the cleats may accidentally release, you may lose balance, and you may fall off the bicycle. If the holding force of the cleat on the pedals is high, the cleats may not be easy to release.
- When riding at low speed or when there is a possibility that you will have to stop (e.g. when making a full turn, at an intersection, when riding uphill or when turning a sharp corner), release the cleats from the pedals beforehand so that you can quickly put your feet on the ground if necessary.
- When riding in adverse conditions, use a lower cleat holding force to attach the pedal cleats.
- To ensure proper attachment and release, keep the cleats and bindings free of dirt and debris.
- Remember to check the cleats for wear regularly. Replace the cleats when they are worn and adjust the cleat holding force before riding and after replacing the pedal cleats. If you do not heed the above warnings, your shoes may not come off the pedals when you want them to, or they may come off unexpectedly or accidentally, resulting in serious injury.
- Reflectors must be installed on the bicycle whenever it is ridden on public roads. Reflectors are sold separately for models that do not come with reflectors as standard. For information regarding compatible reflectors, contact your place of purchase or distributor.
- If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to see you.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html
Type: ROAD, Total package weight: 248g, Use: ROAD/TT/TRI, single-sided, SPD-SL, black, with SM-SH11 cleats, +4mm axle, Material: pedal body (carbon+steel), axle (chrome+steel+nickel)
Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly, and you may be seriously injured.
- Before attempting to ride with these pedals and cleats (on shoes), make sure you understand the operation of the locking/releasing mechanism of the pedals and cleats (on shoes). SPD-SL pedals are designed to release only when necessary. They are not designed to release automatically if you fall off the bicycle.
- Use only SPD-SL shoes with this product. Other types of shoes may not release from the pedals or may release unexpectedly.
- Use only SHIMANO cleats and securely tighten the mounting bolts to the shoes. Failure to tighten the screws securely may result in a fall that will prevent the cleats from releasing.
- Before attempting to ride with these pedals and cleats, apply the brakes, then place one foot on the ground and practice engaging and releasing each cleat from the pedal until you can do it automatically and with minimal effort.
- Ride on a flat surface first until you have learned how to engage and release the cleats from the pedals.
- Before riding, adjust the holding force of the cleats on the pedals to your needs. If the holding force of the cleats on the pedals is weak, the cleats may accidentally release, you may lose balance, and you may fall off the bicycle. If the holding force of the cleat on the pedals is high, the cleats may not be easy to release.
- When riding at low speed or when there is a possibility that you will have to stop (e.g. when making a full turn, at an intersection, when riding uphill or when turning a sharp corner), release the cleats from the pedals beforehand so that you can quickly put your feet on the ground if necessary.
- When riding in adverse conditions, use a lower cleat holding force to attach the pedal cleats.
- To ensure proper attachment and release, keep the cleats and bindings free of dirt and debris.
- Remember to check the cleats for wear regularly. Replace the cleats when they are worn and adjust the cleat holding force before riding and after replacing the pedal cleats. If you do not heed the above warnings, your shoes may not come off the pedals when you want them to, or they may come off unexpectedly or accidentally, resulting in serious injury.
- Reflectors must be installed on the bicycle whenever it is ridden on public roads. Reflectors are sold separately for models that do not come with reflectors as standard. For information regarding compatible reflectors, contact your place of purchase or distributor.
- If the reflectors are dirty or damaged, do not continue riding the bicycle. Otherwise, it will be difficult for oncoming vehicles to see you.
Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html
More from category
Additional information
Need Help?
SHIMANO Road pedals PD-R8000 SPDSL black+br. SM-SH11 carbon,+4mm
105,55 €
87,96 € excl. VAT
