Description
Rear wheel with 12mm thru axle. Tubeless rim width 28.8mm (25C). Spokes consist of 24 tapered spokes. Hub width: O.L.D. 142mm. Micro Spline nut for 12 speed cassette with 10t. sprocket. Center Lock brake disc mount.
Type: MTB, Total package weight: 1350g, Diameter: 29", Mounting method: Thru axle, Rear, Packaged per: pcs, For Center Lock, Compatible with cassettes: 12 speed, Rim height: 21mm, Rim width: 28.8mm, O.L.D.: R12 (142mm), Material: Aluminum
Safety warning
WARNING
Information on installation, adjustment and replacement of products that are not found in the user manual will be provided to you at the place of purchase or at distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User's Manual" thoroughly before use, follow it for proper use, and keep it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction and you may suddenly fall and be seriously injured.
- Before riding the bicycle, check that the wheels are securely attached. Otherwise, a fall may occur, which may result in serious injury.
- Use the appropriate air pressure marked on the tire and rim. When the tire and rim have a maximum air pressure marked, do not exceed the lower value.
- WH-MT601-TL: maximum pressure = 3 bar / 44 psi / 300 kPa. A higher pressure than the marked value may cause a sudden puncture and/or sudden release of the tire, which may cause serious injury.
- Before riding the bicycle, check the wheel axle for cracks and do not use the bicycle if you find a problem. This wheel is not intended for downhill or freeride cycling. Depending on the riding conditions, cracks may develop in the wheel axle. This may cause the axle to burst and an accident that may result in serious injury or even death.
- Before riding the bicycle, check the wheels for broken or loose spokes and spokes, and for damaged or cracked rim surfaces. If you find any of these symptoms, do not use the bicycle. Otherwise, the wheels may be damaged, which may cause a fall. Also check for symptoms such as carbon peeling and cracks.
- Do not use rim brake wheels. These wheels are designed exclusively for use with disc brakes. They do not support rim brakes.
- Check that the axle release lever does not interfere with the disc brake rotor even when fully engaged. If the axle release lever is on the side of the disc brake rotor, it may interfere with the disc brake rotor, which is dangerous. If it interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.
Disc brake rotor
- Check the method of using the axle release lever. Incorrect use of the axle release lever may cause the wheel to fall off, etc. and may result in serious injury.
- These wheels can only be used in combination with a special front fork or E-THRU. Combinations with other front forks or hub axles may cause the wheel to come off while riding the bicycle and result in serious injury.
- When attaching the front wheel to the front fork, follow the instructions in the front fork manual. Depending on the type of front fork used, the locking method and tightening torque for the front wheel may differ. Improper handling may cause the front wheel to come off and result in serious injury.
WARNING
- When using a puncture repair agent, contact the place of purchase or distributor.
- If you are using a Tubeless Ready tire that must be used in conjunction with sealant, use the sealant recommended by the tire manufacturer.
? Warm-up Time
- Disc brakes have a warm-up time and braking force gradually increases as the warm-up time continues. Be sure to avoid any such increases in braking force while using the brakes during the warm-up time. The same thing happens when the brake pads or rotor are replaced.
Manufacturer details
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
Type: MTB, Total package weight: 1350g, Diameter: 29", Mounting method: Thru axle, Rear, Packaged per: pcs, For Center Lock, Compatible with cassettes: 12 speed, Rim height: 21mm, Rim width: 28.8mm, O.L.D.: R12 (142mm), Material: Aluminum
Safety warning
WARNING
Information on installation, adjustment and replacement of products that are not found in the user manual will be provided to you at the place of purchase or at distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User's Manual" thoroughly before use, follow it for proper use, and keep it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.
WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction and you may suddenly fall and be seriously injured.
- Before riding the bicycle, check that the wheels are securely attached. Otherwise, a fall may occur, which may result in serious injury.
- Use the appropriate air pressure marked on the tire and rim. When the tire and rim have a maximum air pressure marked, do not exceed the lower value.
- WH-MT601-TL: maximum pressure = 3 bar / 44 psi / 300 kPa. A higher pressure than the marked value may cause a sudden puncture and/or sudden release of the tire, which may cause serious injury.
- Before riding the bicycle, check the wheel axle for cracks and do not use the bicycle if you find a problem. This wheel is not intended for downhill or freeride cycling. Depending on the riding conditions, cracks may develop in the wheel axle. This may cause the axle to burst and an accident that may result in serious injury or even death.
- Before riding the bicycle, check the wheels for broken or loose spokes and spokes, and for damaged or cracked rim surfaces. If you find any of these symptoms, do not use the bicycle. Otherwise, the wheels may be damaged, which may cause a fall. Also check for symptoms such as carbon peeling and cracks.
- Do not use rim brake wheels. These wheels are designed exclusively for use with disc brakes. They do not support rim brakes.
- Check that the axle release lever does not interfere with the disc brake rotor even when fully engaged. If the axle release lever is on the side of the disc brake rotor, it may interfere with the disc brake rotor, which is dangerous. If it interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.
Disc brake rotor
- Check the method of using the axle release lever. Incorrect use of the axle release lever may cause the wheel to fall off, etc. and may result in serious injury.
- These wheels can only be used in combination with a special front fork or E-THRU. Combinations with other front forks or hub axles may cause the wheel to come off while riding the bicycle and result in serious injury.
- When attaching the front wheel to the front fork, follow the instructions in the front fork manual. Depending on the type of front fork used, the locking method and tightening torque for the front wheel may differ. Improper handling may cause the front wheel to come off and result in serious injury.
WARNING
- When using a puncture repair agent, contact the place of purchase or distributor.
- If you are using a Tubeless Ready tire that must be used in conjunction with sealant, use the sealant recommended by the tire manufacturer.
? Warm-up Time
- Disc brakes have a warm-up time and braking force gradually increases as the warm-up time continues. Be sure to avoid any such increases in braking force while using the brakes during the warm-up time. The same thing happens when the brake pads or rotor are replaced.
Manufacturer details
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html
More from category
Additional information
| Category: | Shimano |
| Location: | Rear |
| Rims material: | Hliník |
| Disc mounting : | Center Lock |
| Wheel mounting: | E-Thru |
| Wheel purpose: | MTB |
| Wheel gear ratios: | 12 prevodov |
| Wheel size: | 29" |
Need Help?
SHIMANO Wheel WH-MT601 29 rear 142x12mm axle 12-speed Center-Lock black
100,65 €
83,88 € excl. VAT
