SHIMANO Wheel XT WH-M8120 29 rear 148x12mm axle 12-speed Center-Lock black

XT M8120 rear wheel with E-Thru (12mm) thru axle. 30C tubeless rim provides greater stiffness for a more aggressive riding style. Micro Spline nut for 12 wheel. Center Lock disc mount. Hub width: O.L.D. 148mm (Boost).

Type: MTB, Total package weight: 1061g, Diameter: 29", Mounting method: Thru axle, Front, Packaged per: pcs, For Center Lock, Rim height: 19.8mm, Rim width: 34.7mm, O.L.D.: F15(110mm), Material: Aluminum

Deore XT is a unique mountain groupset that generations of bikers around the world rely on. Any ride or trail, XT is the solution for mountain biking. Reliable shifting. Excellent brakes. Intuitive maintenance. You can always rely on XT.

View product manual.

Safety Notice
WARNING
Information on installation, adjustment and replacement of products that is not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual intended for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User Manual" thoroughly before use, follow it for correct use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to equipment and surroundings.

WARNING
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the axle release lever/quick release lever may cause the wheel to fall off, etc. and may result in serious injury due to a fall.
- Tires should be inflated to the pressure marked on the tires or rims before use. If the tires or rims have a maximum pressure, do not exceed the lower value listed.
WH-M9000-TL: Maximum pressure = 2.8 bar / 41 psi / 280 kPa
WH-M9020-TL: Maximum pressure = 2.6 bar / 38 psi / 260 kPa
WH-M8000-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8020-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8100-TL: Maximum pressure = 3 bar / 44 psi / 300 kPa
WH-M8120-TL: Maximum pressure = 2.5 bar / 36 psi / 250 kPa
- Higher than the specified pressure may cause sudden bursting and/or sudden loosening of the tire, resulting in serious injury.
- Before riding the bicycle, carefully inspect the wheels to make sure that there are no cracks in the axles; if you find any signs of cracks or other unusual conditions, DO NOT use the bicycle. This wheel is not designed for downhill or freeride cycling. Depending on the riding conditions, the wheel axle may crack. This could lead to the failure of the wheel axle, which could result in an accident that could result in serious injury or even death.
- Before riding the bicycle, inspect the wheels to make sure that the spokes are not bent or loose and that there are no nicks, scratches or cracks on the rim surface. If you find any of these problems, do not use the wheel. The wheel may break and you may fall. Check for carbon separation or cracking.
- Do not use with rim brakes. These wheels are designed for use with disc brakes only. They are not compatible with rim brakes.
- After reading the instruction manual carefully, keep this manual in a safe place for future reference.
E-THRU hub axle type wheel
- Check that even after the axle release lever is securely tightened, the axle release lever does not interfere with the disc brake rotor. If the axle release lever is on the same side as the disc brake rotor, there is a possibility that they will interfere. If it interferes with the disc brake rotor, stop using it and contact the place of purchase or distributor.
- Check how the axle release lever is used. If the axle release lever is not used correctly, the wheel may fall off the bicycle and serious injury may result.
F15 E-THRU hub axle type wheel
- This wheel can be used in combination with a special front fork and E-THRU. If used in combination with any other front fork or hub axle, the wheel may come off the bicycle while riding, resulting in serious personal injury.
- When installing the front wheel on a front suspension fork, always follow the instructions in the front suspension fork's instruction manual. The securing method and tightening torque of the front wheel vary depending on the type of front suspension fork used. Failure to follow the instructions may cause the front wheel to fall off the front suspension fork, resulting in serious injury.
Quick release type wheel
- Check that even after the quick release lever is fully tightened with your palm, the quick release lever does not interfere with the disc brake rotor. If the quick release lever is on the same side as the disc brake rotor, there is a risk that it will interfere with the disc brake rotor. If it interferes with the disc brake rotor, stop using it and contact the place of purchase or distributor.

CAUTION
- Tires should be inflated to the pressure marked on the tires before use.
- If you use a puncture repair agent, consult your dealer or agency.
? Warm-up Time
- Disc brakes have a certain warm-up time, and braking force gradually increases as the warm-up time continues. Be sure to avoid any such increases in braking force while using the brakes during the warm-up period. The same thing happens when the brake pads or rotor are replaced.

Manufacturer details
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone number: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html