SHIMANO Front hub XT HB-M8000 32t. black Center lock

DEORE XT M8000 front hub. MTB hub, 32 holes, designed for use with Center Lock disc. OLD 100mm. Redesigned hub sealing for long life. Classic hub design with cones for easy adjustment and service. Polished ball tracks on cones and hubs for smooth operation and low rolling resistance. Lightweight aluminum alloy quick release (lever).

Type: MTB, Total package weight: 164g, 32 holes, Front, black, Mounting method: Quick release, Center Lock, Material: Aluminum

SHIMANO DEORE XT. Performance, dynamics and determination. Efficient power transfer thanks to DYNA-SYS and Rider-Tuned technology. DEORE XT components were specifically designed for the XC/enduro/all mountain and full suspension segments with large wheel diameters, where extreme strength and reliability of each component are required in all weather conditions.

View product manual.

Safety Notice
WARNING
Information on installation, adjustment and replacement of products that is not found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User's Manual" carefully before use, follow it for proper use, and keep it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- This wheel is equipped with a quick release hub that makes installation and removal easier. Failure to properly install this quick release hub (wheel) on a bicycle may cause the wheel to come off the bicycle while riding, resulting in serious injury.
- Use a front fork equipped with a wheel retention mechanism.
- CAREFULLY READ THE QUICK RELEASE HUB INSTRUCTIONS IN THE OWNER'S MANUAL BEFORE USE. If you have any questions, ask your dealer. IMPROPER INSTALLATION OF THE HUB MAY RESULT IN SERIOUS INJURY.
- Before riding the bicycle, check that the wheels are securely fastened. Improper use of the quick release lever may cause the wheel, etc., to come off and result in serious injury due to a fall.
- If the quick release mechanism is not used correctly, the wheel may come off the bicycle, resulting in serious injury. Before use, carefully read the operating instructions for the quick release mechanism.
- If the quick release lever is on the same side as the disc brake rotor, there is a risk that it may interfere with the disc brake rotor. Check that even after tightening the quick release lever with full force with your palm, the quick release lever does not interfere with the disc brake rotor. If the lever interferes with the disc brake rotor, stop using the wheel and consult your dealer or representative.

CAUTION
Tighten and loosen the quick release lever only with your hands. Never use any tools, such as a hammer, to tighten the quick release lever, as this may cause damage.

Note
- Do not apply any oil to the inside of the hub. Otherwise, the lubricant will leak out.
- Use a neutral detergent when cleaning the hubs. Other cleaning agents may damage the hubs. Do not clean any areas that are not specified for cleaning.
- Do not clean the hub areas with a high-pressure cleaner. Water may enter the hubs, which may reduce their performance.
- The product warranty does not cover natural wear and tear due to normal use and aging.
- For maximum performance, we recommend using SHIMANO brand lubricants and maintenance products.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Phone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html