SHIMANO Rear hub FH-TC500 142x12mm axle 32d. 8/9/10/11-speed. black Center Lock

Strong and lightweight rear hub with industrial bearings for reliable performance. Easy installation of disc brake rotor on Center Lock. 12mm solid E-Thru axle. Nut: HG 8/9/10/11. Hub width: OLD - 142mm. Bearings: 15x28x7mm.

Type: MTB, Total package weight: 474g, 32 holes, Rear, Black, 8/9/10/11 speed -MTB, Mounting method: 12mm thru axle, Center Lock, Material: Aluminum

View product manual.

Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Before riding the bicycle, check that the wheels are securely fastened. Incorrect use of the axle release lever may cause the wheel to fall off, etc. and may result in serious injury due to a fall or collision.
- Read the E-THRU lever user manual carefully. Incorrect use of the E-THRU lever may cause an accident such as the wheel falling off, which may result in serious injury.
- Before riding the bicycle, you should carefully check the hubs to make sure that there are no cracks on the axles; if you find any abnormal conditions, DO NOT use the bicycle. These rear hubs are not designed for downhill or freeride cycling. Depending on riding conditions, cracks may form on the hub axle, which may cause axle failure, which may lead to an accident resulting in serious injury or death.
- Check that the axle release lever does not interfere with the disc brake rotor even when it is fully engaged. If the axle release lever is on the disc brake rotor side, it may interfere with the disc brake rotor, which is dangerous. If the axle release lever interferes with the disc brake rotor, stop using it immediately and contact the place of purchase or distributor.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU contact: https://bike.shimano.com/information/distributors-list.html