SHIMANO Brake caliper BR-M375 mechanical Post Mount+pads B05S

Mechanical brake caliper, compatible with V-Brake levers

Type: MTB, Total package weight: 217g, Front / Rear, black, Plates: , Mounting: Post Mount, Material: Aluminum

View product manual.

Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from the distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For safety, please read this "User's Manual" carefully before use, follow it for proper use, and keep it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
CAUTION - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Because each bicycle may handle slightly differently depending on the model, learn proper braking technique (including brake lever pressure and bicycle handling characteristics) and the operation of your bicycle. Improper use of the bicycle's braking system can result in loss of control, which could lead to serious injury from a fall or collision.
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- In addition, be very careful and keep your fingers away from the rotating disc brake rotor. The disc brake rotor is sharp enough to cause serious injury to your fingers if your fingers get caught in the holes of the moving rotor.
- Do not touch the calipers or disc brake rotor while riding or immediately after getting off the bicycle. The calipers and disc brake rotor become hot during braking, so you may get burned if you touch them.
- Do not allow oil or grease to get on the disc brake rotor and brake pads. Riding a bicycle with oil or grease on the disc brake rotor and brake pads may cause the brakes to malfunction and lead to serious injury due to a fall or collision.
- Check the thickness of the brake pads and do not use them if they are 0.5 mm or less thick. This may cause the brakes to malfunction and lead to serious injury.
- The thickness of brand new brake pads varies depending on the model.
- Do not use the disc brake rotor if it is cracked or deformed. The disc brake rotor may break and lead to serious injury due to a fall. Replace the disc brake rotor with a new one.
- Do not use the disc brake rotor if its thickness is 1.5 mm or less. Also, do not use it if the aluminum surface is visible. The disc brake rotor may break and lead to serious injury due to a fall. Replace the disc brake rotor with a new one.
- Do not use the brake cable if it is rusty, frayed, or cracked. Otherwise, the brakes may not work properly.
- Do not apply the front brake too strongly. Doing so may cause the front wheel to lock and the bicycle to fall forward, causing serious injury.
- Since the required braking distance will be longer in wet weather, reduce your speed. Apply the brakes in time and gently. You may fall or crash and be seriously injured.
- Wet road surfaces can cause the tires to lose traction. To prevent this, reduce your speed and apply the brakes in time and gently. If the tires lose traction, you may fall and be seriously injured.

WARNING
Disc brakes have a certain warm-up time, and braking force gradually increases as the warm-up time increases. Accidents or falls may occur due to loss of control of the bicycle, which may result in serious injury. (The same applies when replacing brake pads or disc brake rotors.)

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html