SHIMANO Rear hub ZEE FH-M640 135x12mm axle 32d. 8/9/10-speed. black Center Lock OEM

Rear hub ZEE M640. MTB hub, 32 holes, designed for use with Center Lock disc. OLD 135mm. For mounting cassettes for 10/11 wheels, with quick-release nut. Designed for 12mm E_THRU thru-axles to increase wheel stiffness. Redesigned hub sealing for long life. Classic hub design with cones for easy adjustment and service. Polished ball tracks on cones and hubs for smooth operation and low rolling resistance.

Type: MTB, Total package weight: 350g, 32 holes, Rear, black, 12mm x 135mm, 8/9/10 speed, Mounting method: Thru axle, Center Lock, Material: Aluminum

View product manual.

Safety warning
WARNING
Information on installation, adjustment and replacement of products that cannot be found in the user manual will be provided to you at the place of purchase or from your distributor. The dealer's manual for professional and experienced bicycle mechanics can be found on our website (https://si.shimano.com).
For your safety, please read this "User's Manual" carefully before use, follow it for proper use, and save it for future reference.
The following instructions must always be followed to prevent personal injury and physical damage to the equipment and surroundings. The instructions are classified according to the degree of danger or damage that may occur if the product is used incorrectly.
DANGER - Failure to follow the instructions will result in death or serious injury.
WARNING - Failure to follow the instructions could result in death or serious injury.
WARNING - Failure to follow the instructions could result in personal injury or physical damage to the equipment and surroundings.

WARNING
- Do not disassemble or modify the product. This may cause the product to malfunction, you may fall unexpectedly and be seriously injured.
- Downhill cycling and freeriding are inherently dangerous activities. It is strongly recommended that riders wear head and body protection and perform a thorough safety check of their bicycles before riding. Remember that you ride at your own risk and should therefore consider your experience and abilities very carefully. There is a risk that you may be involved in an accident resulting in serious injury or death.
- Before riding the bicycle, check that the wheels are securely fastened. You may fall or crash and be seriously injured.
- Before riding the bicycle, you should carefully check the hubs and make sure that there are no cracks in the axles; if you find any unusual conditions, DO NOT USE the bicycle. This rear hub is designed for downhill and freeride cycling. However, depending on the riding conditions, cracks may form on the hub axle, which may result in axle failure. This may lead to an accident, which could result in serious injury or even death.
- When installing the rear wheel on the frame, always follow the instructions in the frame manual. Depending on the type of frame used, the locking method and tightening torque for the rear wheel may differ. Improper handling may cause the rear wheel to fall off and lead to serious injury.

Manufacturer Information
Shimano INC
3-77 Oimatsu-cho, Sakai-ku, Sakai City, Osaka 590-8577, Japan
Telephone: +81-72-223-3210 / FAX:+81-72-223-3258
WEB: shimano.com
Email: contactshimano@shimano-eu.com

EU Representative:
Shimano Europe BV
High Tech Campus 92, 5656 AG Eindhoven, the Netherlands
Tel: +31-40-2612222
WEB: shimano.com
Email: contactshimano@shimano-eu.com
EU Contact: https://bike.shimano.com/information/distributors-list.html